1.WA: Horizontal concealed installation

2.V: two-pipe  P: four-pipe

3.34: Model air volume 34*10m³/h

4.C2: 2 rows of tubes C3: 3 rows of tubes C4: 4 rows of tubes

5.L: Connect left  R: Connect right

6.External static pressure: 12: 12Pa 30:30Pa 50:50Pa 60:60Pa

7.R: rear return air  B: bottom return air

8.F: with filter   default: without filter

9.D25: The water tray is extended by 250mm  SUS: Stainless steel  SUSD25:Stainless steel water tray is extended by 250mm

10.EH20: With 2KW electric heating

11.CV2: Cold coil with 2-port valve assembly installed by factory    CV3: Cold coil with 3-port valve assembly installed by factory

     HV2: Hot coil with 2-port valve assembly installed by factory    HV3: Hot coil with 3-port valve assembly installed by factory

12.F60: 60Hz Default: 50Hz

Model representation example:
     wav136c3l30r represents a 3-row 2-pipe horizontal concealed fan-coil unit with a nominal air volume of 1360m³/h. The water pipe is connected to the left. The external static pressure is 30pa. With a rear return air box.

Features:

Exquisite structure, strong and durable
This series of fan coils adopts galvanized sheet casing. The frame is made of first-grade galvanized steel sheet and processed by molds. The structure is solid and not easily deformed.

High performance, high efficiency
The fan-coil heat exchanger adopts high-quality Ø9.52mm copper tubes and high-efficiency hydrophilic coated aluminum fins, as well as advanced tube expansion technology, so that the copper tubes and aluminum foil can reach an ideal contact. And it enhances transmission heat by large air volume and low noise fans ,  the unit can play an ideal heat transfer efficiency. The water collecting head is made of brass forging to make the water flow evenly distributed and reduce head loss, which further improve the overall heat transfer effect of the coil.

High efficiency and low power consumption
It adopts permanent low-noise capacitor motors with fully enclosed rolling bearing, which is no need to add lubricating oil. The base is insulated with rubber anti-vibration pads to reduce running noise.

Quiet operation, never rust
The wind wheel is a high-efficiency, low-noise and multi-wing centrifugal fan blade. It is made of galvanized sheet with high dynamic balance. The Pittsburgh-style meshing form is adopted between the main plate and the side plate of the wind shell.

No condensation, no water leakage
The high-grade steel plate mold is used for one-step stamping and forming process, no welds, solder joints, and the surface is treated with hot-dip electric paint. 7mmPE heat insulation is integrally bonded to the water tray. Not only the processing is simple and the appearance is beautiful, but also the easy welding of the water tray is eliminated,which greatly prolongs the service life of the water pan. The width and length of the water pan can cover the piping space of the electric valve of the inlet and outlet pipes to ensure the water collection effect.

Easy to adjust and easy to maintain
The bearings used in the motors are rolling bearings. The motor shaft is made of quenched and tempered steel, and the surface has been specially treated for rust prevention, which is durable. Optional three-speed switch or thermostat, which is easy to operate, can adjust indoor air volume and cooling capacity.

High flexibility and low installation cost
The body design is light and handy, the drainage pipes and lines are easy to install, and the left and right connections and the return air direction can be changed to suit the site conditions.

Flexible and convenient selection (optional)
It can be equipped with electric heating function: PTC electric heating is safe and efficient;

It can be equipped with a high static pressure fan, which is suitable for installation with air ducts;

It can be equipped with return air box (lower return air, rear return air) for easy connection of air ducts;

It can be equipped with return air box new air outlet;

It can be equipped with detachable air filter; form: nylon filter, aluminum alloy frame nylon filter, aluminum alloy frame all aluminum filter, photocatalyst filter;

It can be equipped with an extended water pan (extended type-250mm added) to better store valve leakage and condensate;

It can be equipped with stainless steel condensate pan (standard type, extended type- increase 250mm).

Structural features:

Coil: ultra-efficient heat transfer

It adopts high-quality ￠9.52mm copper tube and louvered sine-wave hydrophilic aluminum heat sink fins, and tightly combine the copper tube and aluminum sheet by tube expanding. The water collecting head is forged from brass, and the water flow is evenly distributed, which can exert an ideal overall heat transfer effect.

Cabinet: beautiful appearance, strong structure

The frame is made of first-grade galvanized steel sheet, which is formed by mold processing, and the structure is solid and not easily deformed.

Water tray: no water leakage

The high-grade steel plate mold is used for one-step stamping and forming process, and the surface is treated with hot-dip electric paint. 7mmPE heat insulation is integrally bonded to the water tray. Not only the processing is simple and the appearance is beautiful, but also the easy welding of the water tray is eliminated,which greatly prolongs the service life of the water pan.

Motor: high efficiency, low power consumption

The permanent magnet brushless DC motor is adopted, which has high efficiency and low noise and can realize stepless speed regulation.

Fan: quiet operation

The wind wheel is a high-efficiency, low-noise and multi-wing centrifugal fan blade. It is made of galvanized sheet with high dynamic balance. The Pittsburgh-style meshing form is adopted between the main plate and the side plate of the wind shell.